FleetIQ · Trial day
Everything is on-device. No laptop needed to get a node running - just the node, its USB power, and your phone.
Open the dashboard →
Per node (about a minute each)
1. Power the Core2 (USB-C to a power bank / vehicle USB). It boots and looks for known WiFi.
2. It won't find the test hotspot, so after a few seconds it shows the MSV · SETUP screen with a QR code.
3. Scan that QR with your phone camera. Your phone will offer to join a WiFi network (MSV-setup…, pass msvsetup1) - that's expected, tap Join/Connect. It is not meant to open a page yet.
4. Once joined, the setup page should pop up on its own (iOS: a sheet slides up; Android: a "sign in to network" notice - tap it). If no page appears in ~10 s, open your browser and go to http://192.168.4.1 - that's the node's setup page.
5. The setup page has two sections - "Above-ground WiFi" and "Tunnel WiFi". Fill in both networks (name + password, or paste each WiFi QR text WIFI:S:…;P:…;;), then tap save. The node connects to whichever is in range and switches between them automatically as it moves through the portal. It remembers both next time. Only have one network on site today? Fill just that section - you can add the other later by re-entering setup (hold BtnA at power-on).
What "good" looks like
In the dashboard, open the asset (e.g.
MSV-01) and check:
- ● top status shows connected, asset not "not reporting"
- Live tab: the accel / vibration / pitch traces are moving
- Spectrogram tab: bands filling in (real on-device FFT)
- Assessment: a score with an engine-state run/idle/drive bar and a timeline
If a node won't come up
- No SETUP screen? Hold power ~6 s to restart. It retries known WiFi first, then shows setup.
- Setup page won't open? In your phone browser go to
http://192.168.4.1 while joined to the MSV-setup WiFi.
- Joins but not in the dashboard? Give it ~10 s; confirm the phone got the work password right (retype it).
- Work WiFi is an enterprise / browser-login network? The node can't join those. Use a phone hotspot (plain password) for the trial, and point the node at that.
- Need to re-image a node? On a laptop with Chrome: msviq.whsiq.com/flash
Nodes on the fleet: MSV-01 … MSV-06. All run the same firmware; each streams under its own ID.